Error Analysis

A newer version of this documentation is available. Switch to the latest version docs.

You must include the Contentsquare SDK first using the same integration method and understand how the SDK works.

Update to the latest SDK version

Section titled Update to the latest SDK version

In order to enable Error Analysis in your app and get the most stable version, it is required to upgrade the SDK to its latest version.

Tracking will start at the 1st screenview event, it is required to have screen tracking implemented. Make sure to follow the iOS Track screens sections.

If you are in the process of implementing the SDK for the 1st time (or choose to take this update as an opportunity to review your Privacy related implementation), make sure to follow the iOS Privacy section and use the Opt-in API to get the user consent, otherwise no data will be collected.

Add Contentsquare Error Analysis to your app

Section titled Add Contentsquare Error Analysis to your app

You should include the Contentsquare SDK first and use the same integration method.

  1. In Xcode, Same as Contentsquare SDK, Add the following link via File > Add Packages…:

    https://github.com/ContentSquare/CS_iOS_SDK.git
  2. In your targets’ General settings tab, in the Frameworks, Libraries, and Embedded Content section, add ContentsquareErrorAnalysisModule.

Add the following line to your Cartfile:

Cartfile
binary "https://raw.githubusercontent.com/ContentSquare/CS_iOS_SDK/master/carthage/ContentsquareErrorAnalysisModule.json"

Then run:

Terminal window
carthage update --platform ios --use-xcframeworks

Drag and drop ContentsquareModuleErrorAnalysis.xcframework from the Carthage/Build folder to your targets’ General settings tab, in the Frameworks, Libraries, and Embedded Content section.

Our SDK can be linked dynamically or statically:

Dynamic linking is the default behavior with use_frameworks!, Add the following line to your Podfile:

Podfile
pod 'CS_ErrorAnalysis'

If you specify static linking in your Podfile with use_frameworks! :linkage => :static, Add the following line to your Podfile:

Podfile
pod 'CS_ErrorAnalysis_STATIC'

Our SDK can be linked dynamically or statically:

Get the manual integration framework
Section titled Get the manual integration framework
  1. Go to the iOS SDK GitHub repository.
  2. Find the newest version available (unless instructed otherwise by your CS contact).
  3. Under Assets you should be able to find ContentsquareErrorAnalysisModuleDynamicManually.xcframework.zip, download the file.
  1. Unzip ContentsquareErrorAnalysisModuleDynamicManually.xcframework.zip and you should see ContentsquareErrorAnalysisModule.xcframework:
  2. Copy ContentsquareErrorAnalysisModule.xcframework to any folder in your project.
  3. In your target -> General -> Frameworks, Libraries and Embedded Content, add ContentsquareErrorAnalysisModule.xcframework by clicking ”+” -> “Add Other…” -> “Add Files…“.
  4. Clean build folder and run.
Get the manual integration framework
Section titled Get the manual integration framework
  1. Go to the iOS SDK GitHub repository.
  2. Find the newest version available (unless instructed otherwise by your CS contact).
  3. Under Assets you should be able to find ContentsquareErrorAnalysisModuleStaticManually.xcframework.zip, download the file.
  1. Unzip ContentsquareErrorAnalysisModuleStaticManually.xcframework.zip and you should see ContentsquareErrorAnalysisModule.xcframework:
  2. Copy ContentsquareErrorAnalysisModule.xcframework to any folder in your project.
  3. In your target -> General -> Frameworks, Libraries and Embedded Content, add ContentsquareErrorAnalysisModule.xcframework by clicking ”+” -> “Add Other…” -> “Add Files…“.
  4. Clean build folder and run.

You do not need to do anything to start the Error Analysis SDK, it will start itself with Contentsquare SDK.

When the SDK starts, you should see a log like this one:

// success case
Contentsquare Error Analysis v[SDKVersionNumber] starting in app:: [your.bundle.id]
// fail case
// << No public fail log

API errors automatically collects failed network requests that use URLSession.

Add custom monitoring for specific network requests

Section titled Add custom monitoring for specific network requests

The API errors automatically collects most network requests for your app. However, some requests might not be collected or you might use a different library to make network requests. In these cases, you can use the following API HTTPMetric to manually collect data.

guard let url = URL(string: "https://www.apple.com") else { return }
let request: URLRequest = URLRequest(url: url)
let metric = HTTPMetric(request: request)
let session = URLSession(configuration: .default)
let dataTask = session.dataTask(with: request) { (urlData, response, error) in
if let httpResponse = response as? HTTPURLResponse {
metric.setStatusCode(httpResponse.statusCode)
}
metric.stop()
}
dataTask.resume()

Removing Personal Data in request URL path

Section titled Removing Personal Data in request URL path

By default, the API Errors feature collects the URL path of the failed API requests. To prevent the collection of Personal Data in the URL path, you can rewrite the request URL path with the setURLMaskingPatterns SDK API.

/// This API must called at App launch.
public static func setURLMaskingPatterns(_ patterns: [String])

Replace a step of the path - meaning between two slashes (/) - containing Personal Data with a variable:

  • :user_id becomes CS_ANONYMIZED_USER_ID
  • :address becomes CS_ANONYMIZED_ADDRESS
ErrorAnalysis.setURLMaskingPatterns([
"https://www.contentsquare.com/users/:user_id/address/:address"
])
URL before maskingURL after masking
https://www.contentsquare.com/users/123/address/castle+blackhttps://www.contentsquare.com/users/CS_ANONYMIZED_USER_ID/address/CS_ANONYMIZED_ADDRESS

Validate API error integration

Section titled Validate API error integration

Validate API error collection is enabled

Section titled Validate API error collection is enabled

If in-app features are enabled, a log should appear indicating if API errors is enabled or disabled:

CSLIB ℹ️ Info: API Errors is enabled

If you have logging enabled, you will see API errors:

CSLIB ℹ️ Info: API Error - GET 401 https://api.client.com

The way our SDK works is by auto-starting with the application launch and automatically collects failed network requests that use URLSession.

Once started, our SDK fetches its config from our servers. It will start collecting data from network events if the API errors setting is enabled in the config (this is handled by the Contentsquare team).

The SDK monitors only the API errors with response code equal or above 400, and generates analytics data. These events are then locally stored, and eventually sent to our servers in batches.

For each network error, a new event will be sent in analytics and Session Replay data. Check the following sections to learn more about how data is processed and sent:

API errors troubleshooting details enables you to collect more information about API errors so you can troubleshoot errors faster.

With this feature you will be able to see three types of additional API error details in the Event Stream of Session Replay.

  • The HTTP headers of the request and the response.
  • The body (the data sent by the request or received in the response).
  • The query parameters of the request endpoint (of the URL of the information you request for).

See API Troubleshooting Details for more details.

Only network calls with error (response code above 400) will be collected. Here is the list of data collected:

  • URL (without query strings)
  • HTTP method
  • Response code
  • Timestamp of the request
  • Timestamp of the response
  • HTTP headers of the request
  • HTTP headers of the response
  • HTTP body of the request
  • HTTP body of the response
  • Query parameters of the request endpoint

Known limitations and recommendations

Section titled Known limitations and recommendations

Automatic collection limitations

Section titled Automatic collection limitations

The auto collection doesn’t work for the following methods:

func data(for request: URLRequest) async throws -> (Data, URLResponse)
func data(from url: URL) async throws -> (Data, URLResponse)
func upload(for request: URLRequest, from bodyData: Data) async throws -> (Data, URLResponse)
func upload(for request: URLRequest, fromFile fileURL: URL) async throws -> (Data, URLResponse)
func download(for request: URLRequest) async throws -> (URL, URLResponse)
func download(from url: URL) async throws -> (URL, URLResponse)
func downloadTask(withResumeData: Data) -> URLSessionDownloadTask
func downloadTask(withResumeData: Data, completionHandler: (URL?, URLResponse?, Error?) -> Void) -> URLSessionDownloadTask
func streamTask(withHostName: String, port: Int) -> URLSessionStreamTask
func streamTask(with: NetService) -> URLSessionStreamTask
func webSocketTask(with: URL) -> URLSessionWebSocketTask
func webSocketTask(with: URLRequest) -> URLSessionWebSocketTask
func webSocketTask(with: URL, protocols: [String]) -> URLSessionWebSocketTask

Workaround: For the async methods, use the corresponding Contentsquare methods:

try await URLSession.shared.cs.data(for: request)
try await URLSession.shared.cs.data(from: url)
try await URLSession.shared.cs.upload(for: request, from: data)
try await URLSession.shared.cs.upload(for: request, fromFile: file)
try await URLSession.shared.cs.download(for: request)
try await URLSession.shared.cs.download(from: url)

For other methods, use the custom monitoring APIs.

Conflict with Firebase Performance SDK on auto-collection

Section titled Conflict with Firebase Performance SDK on auto-collection

API errors is compatible with Firebase Performance auto-collection, but the HTTP body from the response won’t be collected by the Error Analysis SDK.

Workaround: Remove FirebasePerformance from your target’s dependencies.

It may also not be compatible with other network auto collection tools.

Setup Firebase Crashlytics compatibility mode

Section titled Setup Firebase Crashlytics compatibility mode

Based on our test, the Contentsquare Crash Reporter is compatible with Firebase Crashlytics as long as the Contentsquare Crash Reporter is initialized first, otherwise some crashes can be missing in Crashlytics.

You can use this API to launch Firebase Crashlytics after Contentsquare Crash Reporter

ErrorAnalysis.onCrashReporterStart { _ in
FirebaseApp.configure()
}
[ErrorAnalysis onCrashReporterStart:^(BOOL _) {
[FIRApp configure];
}];

“When Xcode compiles your source code into machine code, it generates a list of symbols in your app — class names, global variables, and method and function names. These symbols correspond to the file and line numbers where they’re defined; this association creates a debug symbol” See Apple’s documentation for more details.

When an app crashes, the operating system collects diagnostic information about what the app was doing at the time of crash. Some of the most important parts of the crash report are presented as hexadecimal addresses. To translate those addresses into readable function names and line numbers from your source code, a process called symbolication is used. See Apple’s documentation for more details.

In order to symbolicate the crashes reported by a specific version of your app and make them readable, you need to provide the symbol files (dSYMs) that were generated when your app was built.

Make sure Xcode is generating dSYMs for your app:

  1. Open your project in Xcode.
  2. Select the project file in the Xcode Navigator.
  3. Select your main target.
  4. Select the Build Settings tab and click All to show all the build settings.
  5. Filter by Debug Information Format.
  6. Set Debug Information Format to DWARF with dSYM File for all the build types you want to generate dSYMs.
  7. Rebuild your main target.
Download dSYMs from the App Store
Section titled Download dSYMs from the App Store

If you build your main target using bitcode (Bitcode Enabled turned on in build settings) and you uploaded your app’s symbols to the App Store, you need to download the dSYMs from the App Store:

  1. Log in to App Store Connect, then select My Apps.
  2. Select your app from the grid.
  3. Select the build you want to download a dSYM for.
  4. Click Build Details > Download dSYM.

In case you use bitcode to build your main target but you didn’t upload your dSYMs to the App Store, you need to find your dSYMs on your local machine and restore hidden symbols using the BCSymbolMaps Xcode generates.

Find dSYMs on your local machine
Section titled Find dSYMs on your local machine

You can find the dSYMs in the .xcarchive directory on disk:

  1. In Xcode, open the Organizer window (Window -> Organizer).
  2. Select your app from the list.
  3. Control-click an archive and select Show in Finder.
  4. A Finder window should appear. Control-click the xcarchive package and select Show Package Contents.
  5. There should be a dSYMs directory that contains the dSYMs generated in Xcode’s archiving process. If you use the Download Debug Symbols option from Xcode’s organizer, the recompiled bitcode dSYMs are also downloaded to this directory.

Restore hidden symbols using BCSymbolMaps

Section titled Restore hidden symbols using BCSymbolMaps

Restoring hidden symbols using BCSymbolMaps is only required if you built your main target using bitcode (Bitcode Enabled turned on in build settings). If you used bitcode but downloaded the dSYMs from the App Store, the dSYMs will be recompiled and you can skip this step.

To restore hidden symbols you can run the following command:

Terminal window
dsymutil -symbol-map /path/to/archive/BCSymbolMaps /path/to/dsym.dSYM
  1. Login to the Contentsquare platform on https://app.contentsquare.com
  2. Make sure to be on the right project
  3. The project ID can be found in the URL query parameter project: https://app.contentsquare.com/#/{MODULE_NAME}?project={PROJECT_ID}&hash={HASH}]

Follow the dedicated documentation from the Help Center to get the client ID and client Secret: How to create API credentials.

To upload dSYMs to Error Analysis you need to use the provided upload-symbols script. You need to provide the path where the dSYM files are located as a positional argument, and the Project ID, Client ID and Client Secret either as keyword arguments or set them as environment variables.

KeyEnvironment Key
—project-idERROR_ANALYSIS_PROJECT_ID
—client-idERROR_ANALYSIS_CLIENT_ID
—client-secretERROR_ANALYSIS_CLIENT_SECRET

If both are provided, the keyword arguments will prevail over the environment variables.

Set up Xcode to automatically upload dSYM files

Section titled Set up Xcode to automatically upload dSYM files

The following steps describe how to configure Xcode to automatically upload your dSYMs whenever you build your app.

  1. Open your project’s Xcode workspace, then select its project file in the left Project navigator.
  2. From the TARGETS list, select your main build target.
  3. Click the Build Phases tab, then complete the following steps so that Xcode can process your dSYMs and upload the files.
    1. Click + > New Run Script Phase. Make sure this new Run Script phase is your project’s last build phase; otherwise, dSYMs might not be ready.
    2. Expand the new Run Script section.
    3. In the script field (located under the Shell label), add the following run script.

If you are using SPM to integrate the Error Analysis SDK, the upload-symbols script will be located in the SPM checkout path for the SDK. Copy the following script.

Terminal window
# Only upload symbols for App Store build.
# Replace `Release` with the configuration used when uploading to the App Store.
if [ "${CONFIGURATION}" != "Release" ]; then
exit 0
fi
${BUILD_DIR%Build/*}SourcePackages/checkouts/CS_iOS_SDK/scripts/upload-symbols ${DWARF_DSYM_FOLDER_PATH} --project-id <project-id> --client-id <client-id> --client-secret <client-secret>
Using other dependency managers
Section titled Using other dependency managers

If you are using Carthage, CocoaPods or you are manually integrating the Error Analysis SDK, you will need to download the upload-symbols script from the latest SDK release.

  1. Go to the CS_iOS_SDK releases page.
  2. Click on Show all assets located at the bottom of the Assets list of the latest release.
  3. Click on upload-symbols-script.zip.
  4. Unzip the script.
  5. Move the script to your project root, same location as xxxx.xcodeproj.

Copy the following script.

Terminal window
# Only upload symbols for App Store build.
# Replace `Release` with the configuration used when uploading to the App Store.
if [ "${CONFIGURATION}" != "Release" ]; then
exit 0
fi
${SRCROOT}/upload-symbols ${DWARF_DSYM_FOLDER_PATH} --project-id <project-id> --client-id <client-id> --client-secret <client-secret>

The instructions require fastlane 1.93.0 or later.

  1. Add fastlane plugin to your project:
    1. Run fastlane add_plugin fastlane-plugin-contentsquare.
    2. Select Git URL and input https://github.com/ContentSquare/contentsquare-fastlane-plugin.git. See fastlane Plugins for more information.
  2. Call fastlane plugin in your build process: upload_symbols_to_error_analysis(project_id: your_project_id, client_id: "your_client_id", client_secret: "your_client_secret")

Validate crash reporter integration

Section titled Validate crash reporter integration

Validate crash collection is activated

Section titled Validate crash collection is activated

Enabling crash reporting will conflict with any attached debuggers, so make sure a debugger isn’t attached when you crash the app. In case a debugger is attached to the device, Crash Reporter won’t be initialized and a log will be printed in the console:

CSLIB ℹ️ Info: Debugger present, crash reporter is not initialized

To test if Crash Reporter is working properly, you first need to disconnect your test device or simulator from Xcode debugger:

  • Tap on the Edit scheme… option of your current scheme
  • Disable the Debug executable option in your scheme configuration.
  • Build and run your current scheme.

If Crash Reporter is successfully initialized when you launch your application, you should see a log printed in the console:

CSLIB ℹ️ Info: Crash reporter is initialized

Alternatively, you can detach your application from Xcode debugger by stopping it after is launched. This way Crash Reporter will be initialized and will start reporting crashes, but you won’t be able to see the logs printed in the console:

  • Build and run your current scheme.
  • Wait until the app is up and running.
  • Click on Stop running the scheme.
  • Open the app directly from your test device or simulator.

Run your application and force a crash (you can do it by adding a fatalError() in your code). Launch the application again using Xcode and you should see a log printed in the console that indicates that a crash has been detected and sent:

CSLIB ℹ️ Info: Crash event detected and sent for userID: <user-id>, session: <session-number> on screen: <screen-number> - crashID: <crash-id>

Crash Reporter is started automatically and begins to report crashes when your application is launched.

Once started, our SDK fetches its configuration from our servers. It will start reporting crashes if the Crash Reporter setting is enabled (this is handled by the Contentsquare team).

When a crash occurs, a report is created and stored locally in the device. Once the app is launched again, the report is sent to our servers and then removed from the local storage.

For each crash, a new event will be sent to analytics and Session Replay data when the app is launched again after the crash occurred and the network conditions allow for the server to be reached.

Our requests use lowPriority.

Crash Reporter handles multiple types of crashes, including:

  • Mach kernel exceptions
  • Fatal signals
  • C++ exceptions
  • Objective-C exceptions

For each crash we collect information of the application, system, process, threads, stack traces and some other events metadata you can find in collected data points.

Known limitations and recommendations

Section titled Known limitations and recommendations

Compatibility with other crash reporters

Section titled Compatibility with other crash reporters

Beyond Firebase Crashlytics (see Setup Firebase Crashlytics compatibility mode), the Contentsquare Crash Reporter is not compatible with other crash reporters. For more details, reach out to your Contentsquare contact.

Errors occurring in web pages loaded in WebViews can be collected if Webview tracking is setup in your app.

See 📚 Webview Tracking implementation.

Once WebView tracking is implemented, errors collection can be set up.

See 📚 Errors (in WebView)

We always strive to be non-intrusive, and transparent to the developers of the client app. We apply this rule on the performance as well. These are the technical specifics we can share on performance, if you have any questions feel free to reach out to us.

The following performance results were obtained under the following conditions:

ConditionValue
Device modeliPhone 12 Pro Max 256GB
iOS version15.6.1
Test App built using Xcode version14.3.1
Test App built with Swift version5.8
PropertyValue
SDK size (installed size, no Bitcode)1.5 MB
Max RAM usage<3MB
Max SDK CPU peak on event<2%